|
 |
|
Machine shop Equipment and Capacities
|
| |
1- Hollow Spindle Lathe Model C13MBT14/2000
- Capacity 14" spindle
- Semi auto threading cycle, taper attachment, steady attachment.
- Maximum swing over bed 32"
- 2 meters distance between centers.
- Capable of threading API spec 7 and 5 CT connections to a maximum diameter of 13 5/8", and a minimum of 2 3/8" diameter.
|
 |
|
|
|
|
2- COLCHESTER MASCOT 1600 STRAIGHT BED CENTRE LATHE,
- 3" Spindle Bore, 17" Swing over Bed
- 80" distance between centers, Complete with 3 & 4 Jaw Chucks.
- Suitable for manufacture of small components, threading small connections, carry out manufacture and repair maintenance components.
|
 |
|
|
3- Full hydraulic pipe handling system
- Min. capacity : 2 3/8" diameter
- Max. diameter : 13 3/8"
|
|
4- Norton Cylindrical Grinder
- 26" diameter
Suitable for grinding of fishing tools, burning shoes, shafts and general repair of oil field equipment.
|
|
|
5- JARBE Type F4 UNIVERSAL MILLING MACHINE.
- Table size: 70" x 13". Table swivels. Table long traverse: 56". Spindle speeds 36 - 1800 RPM (18).
- Fitted with Universal Vertical Head with 50 INT Spindle. 2 Horizontal Arbor Supports and one Horizontal Arbor. 3 Axis Newall DRO. Coolant and fittings.
- Suitable for manufacture and repair of various oilfield equipment.
|
 |
|
| |
6- A DCOCK & SHIPLEY RADIAL DRILL
- H.P Motor = 3HP
- Max. RPM = 1 4 55
- Min. RPM = 96
- Suitable for drilling D. S.A, flanges, perforated tubing.
|
 |
|
|
7- KEARNS HORIZONTAL BORER
-
Richards Model 450P Dimensions of top table 762 x 762mm Dimensions of bottom table NA Table movement x, z, 914 x 1067mm Vertical movement of head on column 762mm Travel of boring spindle in one setup 457mm Total travel of boring spindle 914mm Travel of facing slide Diameter of boring spindle 76.2mm Taper in boring spindle 40ISO Diameter of facing head Spindle to table edge max Distance between spindle & end steady NA Centre of spindle to table surface max Speeds of boring spindle 6 - 1000 / 27 Speeds of facing head 6 - 297/18 Comments.
-
Wide bed machine with hydraulic locking, 40 ISO spindle with power draw bolt, 3 axis DRO, spindle support bearing, 40 ISO back ends with pull studs, book, covered bed.
|
| |
8. 5 Ton Overhead Crane
9. Grinding Machine
10. Complete Welding Facility
11. 5 Ton Forklift
12. Jetting Machine
13. Air Compressor
14. Raw Stock Material |
| |
| We have 20 Tons of various raw steel bar and plate stock, AISI 4140 and 4145 specification, all fully certified. |
| |
|
- We have 20 Tons of various raw steel bar and plate stock, AISI 4140 and 4145 specification, all fully certified.
- Diameter range on the solid and bored bar from 1" through 16" diameter plate held on the facility ranges from 1" to 6" thick, 5 OD plate and also AISI 4143, certified
|
 |
|
| |
|
| |
<< Back |
| |